Using manual versus mechanized glide path instruments and ProTaper Gold versus ProTaper Next systems in curved canals: micro-CT study

Abstract The aim of this study was to evaluate the root canal shaping effect of ProTaper Gold (PTG) versus ProTaper Next (PTN) instrumentation systems, and of a manual #15 K-type file (K15) versus the ProGlider (PG) mechanized instrument for glide path creation, in severely curved mesial canals. Twenty-four mandibular molars with two separate mesial canals were anatomically matched using computed tomographic scanning, and then divided into two groups (n=12) according to the glide path instrument used, either K15 or PG. In all teeth, the PTG system was used to prepare the mesiobuccal canal, and the PTN, the mesiolingual canal. The teeth were scanned by computed microtomography, before and after root canal preparation, and the values of the initial volume, final volume, volumetric variation, untouched walls, and canal transportation variables were determined. The data were analyzed using the two-way ANOVA test, and the Tukey test for multiple comparisons. There was no significant difference among the study groups regarding volumetric variation or root canal transportation, either in the cervical, middle or apical thirds, or in the entire root canal (p>0.05). In the apical third, the percentage of untouched walls was significantly higher in groups using K15 than in those using PG (p<0.05), namely 33.144% and 23.285%, respectively, irrespective of the instrumentation system. In the other regions, there was no difference between K15 and PG regarding this variable. It was concluded that PG was associated with a lower rate of untouched walls in the apical region than K15.

A review of the latest developments in rotary NiTi technology and root canal preparation.

The introduction of nickel-titanium (NiTi) mechanical instruments dramatically changed clinical endodontics over the last few decades. Before NiTi, it was necessary to use more instruments to create an ideal root canal shape, and many approaches, sequences and techniques were developed over the years. Recently, NiTi endodontic instruments have undergone a series of changes brought about by modifications in design, surface treatments, and thermal treatments to improve their root canal preparation outcomes and reduce associated canal preparation risks during root canal treatment. Heat treatment is one of the most fundamental approaches to improving the fatigue resistance and flexibility of NiTi endodontic instruments. In addition, new kinematics have been developed to offer greater safety and efficiency. This narrative review describes the general properties and manufacturing of NiTi instruments, and the mechanical system evolution of NiTi instruments.

Freehand vs. depth-gauge rotary instruments for veneer preparation: A controlled randomized simulator study.

PURPOSE: To investigate whether depth-gauge burs in veneer preparations influence preparation depth in a randomized, controlled, single-blinded trial and whether inexperienced operators can perform adequate veneer preparations. METHODS: Participants were 20 undergraduate dental students with no prior veneer preparation experience. The instruments used were the "Laminate Veneer System" (LVS), "Keramik-Veneers. de" (KVD), and a "Freehand" group (FH) for reference. All participants prepared three educational acrylic resin maxillae and three mandibular central incisors mounted in typodonts in patient simulators. The objectives were to achieve a preparation depth of 0.6 mm (tooth 11) and 0.4 mm (tooth 31). The sequences of the instruments used and prepared teeth were randomized. The measurements were performed using a laser triangulation coordinate-measuring machine. The data were stratified according to tooth location. RESULTS: The preparation depths of both depth-gauge-instrument-groups LVS and KVD achieved the objectives significantly better than did the instruments from the "Freehand" group (P < 0.001). The differences between the depth gauge groups were insignificant, although the maximum preparation depths were smaller in the KVD group. Regarding the prepared teeth, the preparation depths in the mandibular incisors were lower, and the differences were smaller. CONCLUSIONS: The use of special depth-gauge burs for initial veneer preparation leads to significantly lower preparation depths than "Freehand" preparations. The tapered instruments resulted in a lower incidence of extreme preparation depths. The inexperienced operators performed veneer preparation remarkably well.

Effect of Immersion in Disinfectants on Cyclic Fatigue Resistance of Nickel-Titanium Instruments: An in Vitro Study.

Objectives: The current study aimed to assess the cyclic fatigue resistance of two nickel-titanium (NiTi) rotary files after immersion in 5% sodium hypochlorite (NaOCl) and Deconex. Materials and Methods: In this in vitro study, 90 new M3 Pro Gold size 25.06 and size F2 SP1 files were tested. Forty-five files of the same brand were randomly distributed into three groups (n=15) and submitted to the following immersion protocol for 5 minutes at room temperature: no immersion (control group), immersion in 5% NaOCl, and immersion in Deconex. The cyclic fatigue resistance of the files was then measured in a custom-made tester. Two-way ANOVA was applied to compare the cyclic fatigue resistance of SP1 and M3 NiTi rotary files based on the type of disinfectant solution. Post-hoc LSD test was used for pairwise comparisons and P<0.05 was considered significant. Results: Two-way ANOVA indicated a significant difference in the mean cyclic fatigue resistance of M3 and SP1 NiTi rotary files. The M3 files immersed in NaOCL displayed the lowest and the SP1 files immersed in Deconex showed the maximum cyclic fatigue resistance. The effect of type of disinfectant solution (P<0.001) and type of NiTi file (P<0.001) on cyclic fatigue resistance was statistically significant. Conclusion: The cyclic fatigue resistance of NiTi rotary instruments can be affected by immersion in disinfectants, and the specific type of file and disinfectant used will ultimately determine the extent of this impact.

Cyclic fatigue resistance of three reciprocating nickel-titanium instruments with heat treatment at intrachannel temperature

Introduction: the in vitro study compared the dynamic cyclic fatigue resistance of 3 reciprocating NiTi files with heat treatment. Methods: we distributed 30 new endodontic files in three groups. The endodontic files selected for this experiment were: AF Blue R3 25/06 (AFB) (Fanta Dental, Shanghai, China), X1 Blue File 25/06 (X1B) (MK Life, Porto Alegre, RS, Brazil), and Reciproc Blue 08/25 (RB) (VDW, Munich, Germany. We measured the time to file fractureand the length of the fractured fragment. ANOVA analysis was used, followed by the Tukey test for multiple comparisons, with a significance level of 5% (P < 0,05). Results: the mean time in seconds until the file fractured was 170.7 ±15,1 for AFB files, 110,4 ±26,8 for X1B, and 163,3 ±22,9 for RB files. This difference was statistically significant when comparing X1B to AFB (p: 0,000) and X1B to RB (p: 0,000). However, there are no statistically significant differences between RB and AFB (p:0,739). Conclussions: this study found that RB and AFB files exhibit similar resistance to cyclic fatigue.

Introducción: el estudio in vitro comparó la resistencia a la fatiga cíclica dinámica de 3 limas NiTi recíprocas con tratamiento térmico. Métodos: distribuimos 30 limas endodónticas nuevas en tres grupos. Las limas endodónticas seleccionadas para este experimento fueron: AF Blue R3 25/06 (AFB) (Fanta Dental, Shanghai, China), X1 Blue File 25/06 (X1B) (MK Life, Porto Alegre, RS, Brasil), y Reciproc Blue 08/25 (RB) (VDW, Munich, Alemania. Se midió el tiempo transcurrido hasta la fractura de la lima y la longitud del fragmento fracturado. Se utilizó el análisis ANOVA, seguido de la prueba de Tukey para comparaciones múltiples, con un nivel de significación del 5% (P < 0.05). Resultados: el tiempo medio en segundos hasta la fractura de la lima fue de 170.7 ±15.1 para las limas AFB, 110.4 ±26.8 para las X1B y 163.3 ±22.9 para las RB. Esta diferencia fue estadísticamente significativa al comparar X1B con AFB (p: 0.000) y X1B con RB (p: 0.000). Sin embargo, no hay diferencias estadísticamente significativas entre RB y AFB (p:0.739). Conclusiones: en este estudio se ha comprobado que las limas RB y AFB presentan una resistencia similar a la fatiga cíclica.

3D Surface Scanning-A Novel Protocol to Characterize Virtual Nickel-Titanium Endodontic Instruments.

The nickel-titanium (NiTi) instruments' geometry plays an important role in their performance and behavior. The present assessment intends to validate and test the applicability of a 3D surface scanning method using a high-resolution laboratory-based optical scanner to create reliable virtual models of NiTi instruments. Sixteen instruments were scanned using a 12-megapixel optical 3D scanner, and methodological validation was performed by comparing quantitative and qualitative measurements of specific dimensions and identifying some geometric features of the 3D models with images obtained through scanning electron microscopy. Additionally, the reproducibility of the method was assessed by calculating 2D and 3D parameters of three different instruments twice. The quality of the 3D models created by two different optical scanners and a micro-CT device was compared. The 3D surface scanning method using the high-resolution laboratory-based optical scanner allowed for the creation of reliable and precise virtual models of different NiTi instruments with discrepancies varying from 0.0002 to 0.0182 mm. The reproducibility of measurements performed with this method was high, and the acquired virtual models were adequate for use in in silico experiments, as well as for commercial or educational purposes. The quality of the 3D model obtained using the high-resolution optical scanner was superior to that acquired by micro-CT technology. The ability to superimpose virtual models of scanned instruments and apply them in Finite Element Analysis and educational purposes was also demonstrated.

Biofilm on and structural damage of rotary cutting instruments after 5 cycles of clinical use and processing.

BACKGROUND: Rotary cutting instruments (RCIs) are sterilized routinely. The authors aimed to analyze the structural integrity, presence of dirt, and microbial contamination of RCIs used in clinical practice after processing. METHODS: Eighty-four RCIs (42 carbide burs, 42 diamond burs) were divided into baseline, control, and test groups. The RCIs were evaluated by means of scanning electron microscopy and microbiological analysis. Evaluation criteria included presence of structural damage, dirt, biofilm, and isolated cells and their phenotypic profile. RESULTS: The carbide burs from all groups and diamond burs from the test groups had structural damage. Dirt was observed in the baseline and test groups. Three bacterial species were isolated from 4 RCIs (9.52%). An isolated cell was observed from 1 carbide bur. Biofilm was observed on 3 RCIs (7.14%). CONCLUSIONS: RCIs should not be subjected to multiple uses; after the first clinical use they accumulate structural damage and dirt that hampers the cleaning step, causing failure in the sterilization process. PRACTICAL IMPLICATIONS: The presence of microorganisms and structural damage on the RCIs confirmed that they are not amenable to processing, a fact that characterizes them as a single-use health care product.

Postoperative Pain After Using Passive Ultrasonic Irrigation and EasyClean Device, Irrigation Activation Techniques: A Randomized Clinical Trial.

INTRODUCTION: This randomized clinical trial aimed to compare postoperative pain after the use of 2different irrigation activation techniques: passive ultrasonic irrigation and the EasyClean device. METHODS: Sixty-six single-rooted teeth diagnosed with asymptomatic pulp necrosis and apical periodontitis were randomly assigned to 2experimental groups (n = 33), which differed in the irrigation activation technique. Postoperative pain levels were assessed after 24, 48, and 72 hours using a verbal rating scale; the ibuprofen intake amount was recorded at the same time intervals. Data were analyzed using Student's t-test, Mann-Whitney U and Fisher's exact tests, with a significance level of 5%. RESULTS: Postoperative pain levels and analgesic intake frequency were not significantly different across the 2irrigation activation techniques (P > .05). The frequencies obtained in relation to the prevalence of postoperative pain were 3.1-25.8% for all participants of the 2studied groups. CONCLUSION: The irrigation activation techniques of passive ultrasonic irrigation and the EasyClean device were found to be equivalent in terms of postoperative pain and analgesic intake.

Comparative analysis of torsional and cyclic fatigue resistance of ProGlider, WaveOne Gold Glider, and TruNatomy Glider in simulated curved canal.

Objectives: This study aimed to compare the torsional and cyclic fatigue resistance of ProGlider (PG), WaveOne Gold Glider (WGG), and TruNatomy Glider (TNG). Materials and Methods: A total of 15 instruments of each glide path system (n = 15) were used for each test. A custom-made device simulating an angle of 90° and a radius of 5 millimeters was used to assess cyclic fatigue resistance, with calculation of number of cycles to failure. Torsional fatigue resistance was assessed by maximum torque and angle of rotation. Fractured instruments were examined by scanning electron microscopy (SEM). Data were analyzed with Shapiro-Wilk and Kruskal-Wallis tests, and the significance level was set at 5%. Results: The WGG group showed greater cyclic fatigue resistance than the PG and TNG groups (p < 0.05). In the torsional fatigue test, the TNG group showed a higher angle of rotation, followed by the PG and WGG groups (p < 0.05). The TNG group was superior to the PG group in torsional resistance (p < 0.05). SEM analysis revealed ductile morphology, typical of the 2 fracture modes: cyclic fatigue and torsional fatigue. Conclusions: Reciprocating WGG instruments showed greater cyclic fatigue resistance, while TNG instruments were better in torsional fatigue resistance. The significance of these findings lies in the identification of the instruments' clinical applicability to guide the choice of the most appropriate instrument and enable the clinician to provide a more predictable glide path preparation.

High-Speed Dental Instruments: An Investigation of Protein-Contaminated Dental Handpieces with the Bicinchoninic Acid Assay in Dental Offices in Styria, Austria.

Due to permanent contact with bodily secretions such as blood and saliva, the dental workplace poses a high risk of infection for patients as well as for personnel. High-speed dental instruments are still considered one of the major hygienic risks, as the high-speed rotation of the attachments leads to the retraction of infectious material from patients' oral cavities. The aim of this study was to investigate the extent to which dental handpieces are contaminated after use. Spray-water samples were taken from different handpieces used in seven dental offices and protein concentrations were measured photometrically. In the first part of the study, samples were collected from each handpiece before and after the treatment of the patients. Additionally, the changes in protein concentration after consecutive treatments in which the same high-speed dental instrument was used were investigated. The results demonstrated measurable protein concentrations in 91.2% of a total of 398 samples, and 96.4% of the spray-water samples taken after treatment showed a discrepancy from the initial measured protein concentration. In 68.4% an increase in protein concentration was observed, whereas in 27.9% a decrease was measured. In conclusion, the internal contamination of high-speed dental instruments frequently occurs in daily usage and consequently may lead to the transmission of infectious agents by flushing the contaminated water out of the spray water tubes. Moreover, it must be pointed out that internal cleansing of handpieces is insufficient and that a final mechanical disinfection is indispensable.

Análisis microbiológico a corto y largo plazo del material usado para esterilizar instrumental odontológico / Short and long-term microbiological analysis of the material for sterilize dental instruments

Introducción: el material para empaquetar el instrumental odontológico, como pueden ser bolsas de tela, papel o plástico, es usado por profesionales de la salud; sin embargo, es necesario esclarecer la efectividad de cada uno y determinar el tiempo que permanece estéril luego del procedimiento. Objetivo: identificar la eficacia de tela, plástico y papel como materiales para esterilizar instrumental a corto y largo plazo. Material y métodos: se realizaron cultivos sólidos y líquidos de instrumental esterilizado en tres materiales y con diferentes tiempos de postesterilización. Se incubaron a 36 oC por 72 horas en condiciones aerobias y anaerobias. Los resultados se analizaron usando una prueba de Kruskal-Wallis, seguida de una prueba de Dunn. Resultados: los resultados mostraron que inmediatamente después del proceso de esterilización, los tres materiales son efectivos (Kruskal-Wallis test, p = 0.2752), 24 horas (p = 0.2492), siete (p = 0.0509) y 14 días (p = 0.0006). Veinticuatro horas posterior a la esterilización la tela no es efectiva, el plástico disminuye su efectividad y el papel sigue siendo efectivo. Conclusión: en nuestros resultados, el papel es la mejor opción para esterilizar instrumental (AU)

Introduction: material such as cloth, paper or plastic bags to wrap dental instruments is used by health professionals, however, it is necessary to clarify the effectiveness of each one and determine if it remains sterile after the procedure. Objective: to determine the effectiveness of cloth, plastic and paper as materials to sterilize dental instruments in the short and long term. Material and methods: we carry out solid and liquid cultures of sterilized instruments in three materials, at different post-sterilization times, incubated at 36 oC for 72 hours under aerobic and anaerobic conditions, and the results were analyzed using a Kruskal-Wallis test, followed by from a Dunn's test. Results: our results showed that immediately after the sterilization process the three materials are effective (Kruskal-Wallis; p = 0.2752), 24 hours (p = 0.2492), 7 (p = 0.0509) and 14 (p = 0.0006) days. Twenty-four hours after the cloth is not effective, plastic decreases its effectiveness and paper remain effective. Conclusion: in our results, paper is the best option to sterilize dental instruments (AU)

XP-endo Finisher effectively reduces hard-tissue debris accumulated in root canals with isthmus after preparation with a reciprocating file system.

This study compared the accumulated hard-tissue debris (AHTD) after preparation with WaveOne Gold (WOG) to XP-endo Shaper (XPS), without and with a supplementary step using XP-endo Finisher (XPF) using clinically applicable irrigation. Twenty-four mesial roots with two canals and single foramen were micro-CT-scanned and matched. Scans were also taken after preparation with WOG or XPS, and after XPF. Irrigation with 2.5% NaOCl (total: 17 ml per canal) and 17% EDTA (2.5 ml per canal) was performed using a 30ga Max-I-Probe needle placed up to the working length. Morphological parameters were calculated and compared within and among groups. XPF significantly reduced unprepared area within XPS and WOG groups, and AHTD within WOG (p < 0.05). There were no significant differences between WOG and XPS after preparation and after XPF (p > 0.05). In conclusion, WOG and XPS produced a similar volume of AHTD, but the supplementary step with XPF decreased the AHTD in the WOG group.

Influence of traverse and waveone gold glider glide path files on the amount of apically extruded debris / Influência das limas glide path Traverse e Wave One Gold Glider na quantidade de detritos extruídos apicalmente

Objective: The aim of this study was to evaluate the effect of different glide path files on the amount of apically extruded debris. Material and Methods: Sixty single-canaled mandibular premolars were accessed and randomly divided into three groups (n= 20) according to the file used for glid path creation; group A using Traverse file, group B using WaveOne Gold Glider, group C using stainless steel K file. All teeth were then instrumented using the Reciproc system. The debris extruded apically during instrumentation were collected into pre-weighed Eppendorf tubes which were then stored in an incubator at 70 °C for 5 days. The weight of the dry extruded debris was established by subtracting the pre-instrumentation and post instrumentation weights of the Eppendorf tubes. The data were analyzed using one-way ANOVA test, and post hoc analysis. Results: WaveOne Gold Glider produced the least amount of apical extruded debris (0.41±0.25) followed by the Traverse group (0.59±0.20) then the K-file group (0.64±0.16) with a statistically significant difference (p=0.003). Conclusion: Apical extrusion of debris is inevitable during root canal cleaning and shaping. Creation of glide path using engine-driven files produces less amount of apically extruded debris compared to hand-driven K-files. (AU)

Objetivos: O objetivo deste estudo foi avaliar o efeito de diferentes limas glide path na quantidade de detritos extruídos apicalmente. Metodologia: Sessenta pré-molares inferiores com canal único foram acessados e divididos aleatoriamente em três grupos (n= 20) de acordo com a lima utilizada para criação do glid path; grupo A usando lima Traverse, grupo B usando WaveOne Gold Glider, grupo C usando lima K de aço inoxidável. Todos os dentes foram então instrumentados usando o sistema reciprocante. Os detritos extruídos apicalmente durante a instrumentação foram coletados em tubos Eppendorf pré-pesados que foram então armazenados em uma incubadora a 70°C por 5 dias. O peso dos detritos secos extruídos foi estabelecido subtraindo-se os pesos dos tubos Eppendorf antes e após instrumentação. Os dados foram analisados por meio do teste one-way ANOVA e análise post-hoc. Resultados: WaveOne Gold Glider produziu a menor quantidade de detritos apicais extruídos (0,41±0,25) seguido pelo grupo Traverse (0,59±0,20) e depois pelo grupo K-file (0,64±0,16) com uma diferença estatisticamente significativa (p=0,003). Conclusão: A extrusão apical de detritos é inevitável durante a limpeza e modelagem do canal radicular. A criação do glide path usando limas acionadas por motores produz menos quantidade de detritos extruídos apicalmente em comparação com as limas K manuais. (AU)

The state of the art and future trends of root canal files from the perspective of patent analysis: a study design.

The goal of this review is to present a detailed and comprehensive description of the published work from the past decade regarding methods of improved material, geometric design, and additional functions in root canal files. The main improved methods of files and the most common technologies were further addressed, underlining their advantages and main limitations. Online databases (the Derwent Innovations Index) were consulted on this topic. Published work from 2010 to 2022 was collected and analyzed the relevant papers were chosen for inclusion in this review. The patent map classified the latest phase of the root canal files based on the analysis of the number of patents. The performance of the root canal files, such as materials. Directly affects the quality of the root canal therapy. We provided a thorough review of advances in the field of root canal files. In particular, three categories of improved methods were examined and compared, including material-based methods, geometry-based methods, and those based on additional functions. To understand this state of the art of different improved methods of root canal files, we conducted a literature analysis and a series of comparisons between different methods. The features and limitations of each method of root canal files were further discussed. Finally, we identified promising research directions in advancing the methods for the improved performance of root canal files. There is no perfect technology for all material/geometric design/additional functions, capable alone of fulfilling all the specificity and necessities of every patient. Although it is very promising, the material of the files remains understudied, and further work is required to make material science a pervasive technology in root canal therapy, and contribute to endodontic and periapical diseases by assisting in the subsequent development of root canal files.

Bacterial microleakage in endodontically treated teeth following two methods of postspace preparation at two-time intervals: An in vitro study.

Aims: The goal of this study was to analyze the bacterial microleakage following two methods (heat vs. rotary) of postspace preparation after two-time intervals (immediate vs. 1 week later). Setting and Design: In vitro-comparative study. Materials and Methods: Eighty-two single-rooted teeth were decoronated at the cementoenamel junction. Root canals were prepared using rotary files. After root canal obturation, specimens were randomly allocated to 4 experimental groups based on the method of postspace preparation (heat or peeso reamer) and time interval (immediate or 1 week later) (n = 18). Group 1: Peeso reamer-immediate, Group 2: Heat-immediate, Group 3: Peeso reamer-1 week later, Group 4: Heat-1 week later. 10 specimens were considered as positive and negative controls (n = 5 each). Custom-made dual-chamber devices were used to appraise the bacterial microleakage for 60 days. Statistical Analysis Used: Data were analyzed with Chi-Square and Log-Rank tests and Cox regression. Results: All through the experimental period, there was no significant difference (P = 0.41) between the studied groups. Groups 2 and 4 had the highest microleakage and the lowest survival rate (55.56% ± 11.71%). Group 1 showed the lowest microleakage and the highest survival rate (77.8% ± 9.80%). Conclusions: The applied techniques for postspace preparation and the time intervals (neither independently nor simultaneously) showed no significant difference in the field of bacterial leakage.

Mechanical properties analysis of medical endodontic instruments based on parameterization.

To study the relationship between structural parameters and mechanical properties of endodontic instruments, the T02004B25 nickel-titanium endodontic instrument was selected for bending and torsion tests and finite element simulation analysis, which demonstrated the feasibility of simulation analysis method. Then based on the idea of parametric design, the models of the endodontic instruments with different structural parameters (cross-section, pitch, taper) were established, and the bending-torsion performance simulation analysis was completed. The results showed that the mechanical properties of endodontic instruments with different structural parameters are different. It is necessary to find the optimal parameters for different structure parameters of endodontic instruments to maximize their service life.

Evaluation of a Rapid Biological Spore Test for Dental Instrument Sterilization.

AIM: This study evaluated the reliability of a new rapid biological spore test (BST) for determining the sterilization efficacy of dental steam autoclaves within 20 minutes, as compared to a conventional BST requiring 2 days of incubation after autoclave exposure. MATERIALS AND METHODS: A total of 177 pairs of BST, each composed of a rapid test (Celerity™ 20 Steam Biologic Indicator, Steris) and a conventional BST (Attest™ 1262 Biological Indicator, 3M), both containing Geobacillus stearothermophilus spores, were placed into steam autoclaves loaded with instruments, and subjected to either sterilizing (157 pairs) or non-sterilizing conditions (20 pairs). Celerity™ BST was then incubated for 20 minutes at 57°C, with the growth medium evaluated spectrophotometrically for fluorescent α-glucosidase signal changes (no change with successful sterilization; increased fluorescence after failed sterilization). Attest™ BST was incubated for 48 hours at 57°C, after which a pH-based color change in the culture broth was visually assessed (no change in purple color with successful sterilization; change to yellow color with failed sterilization). RESULTS: Celerity™ and Attest™ BST both accurately identified successful sterilization, with no G. stearothermophilus spore growth from either BST after exposure to sterilizing steam autoclave conditions (100% agreement between 157 pairs of each BST). Both BST also accurately detected unsuccessful sterilization, with all tested ampoules positive for G. stearothermophilus spore germination after non-sterilizing steam autoclave time periods. Both BST exhibited 100% sensitivity, specificity, and accuracy for detection of sterilizing steam autoclave conditions. CONCLUSION: Celerity™ BST, after only 20 minutes incubation, performed equally as well as a BST requiring 48 hours incubation in determining the sterilization efficacy of dental steam autoclaves. CLINICAL SIGNIFICANCE: Rapid BST offer earlier detection of sterilization failure before potentially contaminated dental instruments are used in clinical patient care.

Influence of pecking frequency at working length on the volume of apically extruded debris: A micro-computed tomography analysis.

Background/purpose: There is no consensus to date on how many repetitive pecking motions at working length (WL) should be regarded as optimal during instrumentation. Therefore, this study aimed to evaluate the effect of pecking frequency at WL on the volume of apically extruded debris using three single-file systems in curved, oval-shaped canals. Materials and methods: Forty-five single-rooted mandibular premolars with curved, oval-shaped canals were prescanned by micro-computed tomography, anatomically paired-matched, and randomly divided among three groups (n = 15 each): Reciproc Blue (RB), WaveOne Gold (WOG) and XP-endo Shaper (XPS). Samples were embedded in agarose gel to collect extruded debris. After preparation to the WL, each sample was rescanned after one, two, four, 10, and 20 pecking motions at WL, respectively. The debris volume was innovatively calculated by a modification of an existing method using micro-computed tomography. The apical preparation size was also measured. Data were compared using a two-way repeated-measures analysis of variance. Results: All single-file systems extruded debris apically, irrespective of the pecking frequency at WL. The extruded debris volume correlated positively with the minor foramen size (P < 0.05); both increased with pecking frequency for each single-file system (P < 0.05). The minor foramen size corresponded to the instrument tip size when reaching the WL once. Conclusion: To produce less debris extrusion and obtain a predictable foramen size corresponding to the instrument tip size, a single pecking motion may be preferred when using single-file systems. Caution should be exercised when applying the current results to clinical situations.

Effect of Sodium Hypochlorite Irrigation with and Without Surfactant on Maximum Operative Torque and Vertical Force of Nickel-Titanium Endodontic Instruments.

Objectives: This study aimed to evaluate the effects of root canal irrigation on maximum operative torque and vertical force of Wave One Gold Primary (WOG), Reciproc Blue R25 (RB) and Protaper Next X2 (PTN) endodontic rotary instruments during simulated root canal preparation in the presence and absence of a surfactant "benzalkonium chloride". Material and Methods: A custom-made automated irrigation and torque/force analyzing device connected with endomotor was used for the study. Acrylic resin blocks with simulated curved root canals of 35° were randomly assigned to 6 groups for each file. The following irrigants were used during simulated root canal preparation with continuous rotation or reciprocation motion with pecking mode: 5% NaOCl and 5% NaOCl with 0.84% benzalkonium chloride. Maximum torque and vertical force values ​​of files were recorded during preparation. Results: BAC addition to NaOCl did not significantly affect maximum torque values of instruments (p>0.05). WOG generated lowest torque value compared with PTN and RCB in both groups (p<0. 05). RB generated higher vertical force compared with WOG and PTN instruments in NaOCl+BAC group. The surface modifier decreased the maximum force value of WOG instrument (p<0.05). Discussion: Surfactan addition to NaOCl had no negative effects on maximum torque and force of the instruments.

Are Physics Forceps Less Traumatic than Conventional Forceps for Tooth Extraction? A Systematic Review and Meta-Analysis of Randomized Controlled Trials.

This systematic review and meta-analysis studied the clinical outcomes with physics forceps compared to those with conventional forceps for closed dental extraction. A systematic literature search was performed to identify all the published randomized clinical trials that compared the relevant clinical outcomes with physics forceps to those with conventional forceps for closed dental extraction. A total of 11 studies were included. The adverse events were significantly lower with physics forceps (n = 48) compared to with conventional forceps (n = 120), with an odds ratio of 0.42 [0.25, 0.70], Z = 3.78 (p = 0.0002), and I2 = 21%. There were statistically significant differences in the incidence of GL (p = 0.04), and tooth or root fracture (p = 0.0009). Operating time was significantly lower in physics forceps than that of conventional forceps, mean difference (-20.13 (-30.11, -10.15)), Z = 3.78 (p = 0.0001), I2 = 79%. The available evidence is limited by a high risk of bias and low evidence certainty. Based on the current evidence, physics forceps might be better than the conventional extraction forceps in terms of the extraction duration, pain after extraction, trauma to both hard and soft tissue, and complications. Physics forceps are newer instruments that have not yet been introduced in the teaching of dental graduates. The introduction of physics forceps can be time saving, less invasive and reduce post-extraction complications.